How many rails and posts a split rail fence takes
Split rails are 11 feet long and lap 6 inches into each post, so the posts stand about 10 feet 3 inches apart. 200 feet of fence is 2,400 ÷ 123 = 19.5, rounded up to 20 bays, and a three-rail fence about 4 feet high puts three rails in each: 60 rails and 21 posts — 19 line posts drilled through for three rails, and an end post at each end.
The posts are 7 feet long: 48 inches stand above the ground and 30 go into it, the deep end of the 24 to 30 inch holes West Virginia Split Rail gives. A two-rail fence about 3 feet high is 40 rails and 6 foot posts for the same 200 feet.
Posts are bought for where they stand
A split rail post is mortised for its rails: a line post through both faces, an end post halfway in from one side, a corner post on two faces at a right angle. A gate post is drilled on one side only. The list counts each kind where the line puts it, because the yard sells them apart.
Earth, not concrete
Rail makers tamp their posts in. West Virginia Split Rail fills the hole with the earth that came out of it, a foot at a time, packed hard, and says not to set a post entirely in concrete: a split log in a sleeve of concrete holds water against itself. So the concrete and gravel rows start unticked. The page still works out what the holes would take — 46 bags — for anyone setting the end and gate posts in concrete; tick the rows if you do.
A split rail fence will not keep a dog in or a child out of a pool; wire mesh stapled to the inside of the rails keeps small animals in. We are not connected with any maker, store or supplier named here.