Find a tool

Tile Cost Calculator

Tile, grout, mortar and trim — what they come to.

Estimated prices — type your store's; labor not included.

16' · 192 in · 16 ft · 4.8768 m

13' · 156 in · 13 ft · 3.9624 m

208 ft²

Inch Calculator advises about 10% for tile laid straight, which is where this starts; 15% for diagonal, and Alpine 10-15% for herringbone. Mullican advises 5% for wood laid straight. It is added once, to whatever gets cut — the tiles or the planks, and the baseboard. A grout or mortar figure, where the page has one, is worked out on the surface as laid.

This page recalculates as you type. There is no Calculate button.

Answer

Save imageExcel

Ticked items cost

$594.00

208 ft² to tile · 108 tiles · 14 boxes

Buy 108 tiles
Boxes 14 × box of 8
Area to tile 208 ft²
More numbers
With the 5% for cuts 218.4 ft²
Grout 11.24 lb
Thinset 4 bags
Baseboard 58 ft
DrawingThe project drawn to scale. Area 1: 16' × 13'.16'13'Area 1

Buying noteLarge tile wants mortar on the back of the tile as well as on the floor. Lift the first one back up and look at how much of it is covered before you set the rest.
Buying noteAt 1/8" buy sanded grout: unsanded is for joints under 1/8 in, and it cracks in a wider one. Our yield figure comes off the sanded chart, so this is the case it was worked out for.
Buying noteThe baseboard runs the whole way round the floor here. It does not stop at a doorway, and how many doorways a room has is not something a shape can tell us — take off about 3 ft (1 m) for each.
Buying noteBuy the spare box with the rest, out of the same dye lot. A box bought a month later is a slightly different color, and nobody tells you until it is on the floor.

Breakdown

Surface Measurements Qty Area Share
Area 1 16' × 13' Add ×1 208 ft²

What to buy

Buying noteLarge tile wants mortar on the back of the tile as well as on the floor. Lift the first one back up and look at how much of it is covered before you set the rest.
Buying noteAt 1/8" buy sanded grout: unsanded is for joints under 1/8 in, and it cracks in a wider one. Our yield figure comes off the sanded chart, so this is the case it was worked out for.
Buying noteThe baseboard runs the whole way round the floor here. It does not stop at a doorway, and how many doorways a room has is not something a shape can tell us — take off about 3 ft (1 m) for each.
Buying noteBuy the spare box with the rest, out of the same dye lot. A box bought a month later is a slightly different color, and nobody tells you until it is on the floor.

Shopping list

14 14 × box of 8 $434.00 Reference price $23.50. Type your store's. Reference price $31.00. Type your store's. Reference price $29.50. Type your store's. Reference price $30.00. Type your store's. Reference price $33.00. Type your store's. Reference price $28.00. Type your store's. Reference price $26.00. Type your store's. Reference price $42.00. Type your store's.
1 1 × 25 lb bag $24.00 Reference price $24.00. Type your store's. Reference price $14.00. Type your store's.
4 3 × 50 lb bag + 1 × 25 lb bag $62.00 Reference price $17.00. Type your store's. Reference price $11.00. Type your store's.
4 4 × 16 ft stick $74.00 Reference price $9.50. Type your store's. Reference price $14.00. Type your store's. Reference price $18.50. Type your store's.
Ticked items $594.00

Untick what you already have. Each row has its price beside it — type what your store charges.

Save imageExcel

Standards

We hold the criteria and the clause, not the wording of the standard.

Not checked ANSI A108.02 · minimum joint width, as CTEF reads §4.3.8

A 1/8" joint clears the 1/16" minimum, which is as far as a measurement gets. The clause also asks for three times how much the tiles vary across their faces — lay a few out dry and look before you commit to the spacers.

Not checked ANSI A108.02 · large format minimum joint, as CTEF reads §4.3.8.1

A 1/8" joint is the minimum for rectified tile and under the 3/16" a calibrated tile needs. Which one you have is printed on the box — no measurement here can tell us.

Not checked ANSI A108.02 · mortar contact, as CTEF reads A108.02

The standard asks for 80% of the back of each tile in contact with mortar in a dry area, 95% in a wet one. It is measured by lifting a set tile back off — nothing on this page can judge it.

How this was worked out

Every number below is yours. Each constant links to the row where you can change it.

Area 1 16' × 13' 208 ft²
With the waste for cuts 208 ft² × (1 + 5%) 218.4 ft²
One tile and its joint (12 in + 1/8") × (24 in + 1/8") ÷ 144 in²/ft² 2.0314 ft²
Tiles to buy 218.4 ft² ÷ 2.0314 ft² 108 tiles
Boxes to buy 108 tiles ÷ 8 tiles 14 × box of 8 · 4 tiles left over
Grout 208 ft² × 0.8336 in³/ft² (1/8" joints, 3/8" deep) × 0.0648 lb/in³ 11.24 lb → 1 × 25 lb bag

Change:Tile thickness, floor tileGrout in a cubic inch

Thinset 208 ft² ÷ 60 ft²/bag 4 bags → 3 × 50 lb bag + 1 × 25 lb bag

Change:Thinset coverage, 1/4 × 3/8 notchBag the coverage is published for

Baseboard round the floor 58 ft × (1 + 5%) 60.9 ft → 4 × 16 ft stick
What it comes to 14 × $31.00 + 1 × $24.00 + 3 × $17.00 + 1 × $11.00 + 4 × $18.50 $594.00

Assumptions

Every one of these is editable. Change one and the answer changes with it.

Assumption Value Confidence
Tile thickness, floor tile3/8 in, the nominal body thickness of porcelain floor tile 12 in and larger, and the thickness Custom Building Products' coverage chart lists a 12 x 24 at. Grout sits as deep as the tile is thick, so this number scales the grout straight; measure yours and type it. ~ in Derived or single-supplier
Grout in a cubic inch25 lb of grout fills about 386 in³ of joint, worked back out of 30 cells of Custom Building Products' Polyblend Plus Sanded coverage chart. A bag holds one volume whatever tile it goes into, so this is a density rather than a per-size figure. ~ lb/in³ Derived or single-supplier
Thinset coverage, 1/4 × 3/8 notch60 to 67 ft² a 50 lb bag with a 1/4 × 3/8 in square-notch trowel (TDS-119), the commonest notch for a 12 in and larger floor tile. The low end is the figure here. ft²/bag From a data sheet or an agency document
Bag the coverage is published forThe bag the coverage figures below are published for. Custom Building Products' TDS-119 states VersaBond coverage per 50 lb bag, so a 25 lb bag covers half as much: coverage scales with weight, and the page solves the order in pounds rather than in bags for that reason. lb/bag From a data sheet or an agency document
Minimum joint1/16 in, the smallest grout joint ANSI A108.02 allows, and never less than three times the tile's facial dimension variation. Read in the Ceramic Tile Education Foundation's article on the clause, not in the standard itself - ANSI charges for the text. in From a data sheet or an agency document
Minimum joint, rectified large format1/8 in, the smallest joint for rectified tile with an edge over 15 in. A rectified tile is ground to size after firing, so its edges are square enough for a narrow joint; a calibrated one is not. in From a data sheet or an agency document
Minimum joint, calibrated large format3/16 in, the smallest joint for calibrated tile with an edge over 15 in. Whether a box holds rectified or calibrated tile is printed on the box and is not something any measurement on this page can say, which is why the check that reads this number never passes on its own. in From a data sheet or an agency document
Edge at which large format starts15 in: above this edge length the minimum joint stops being 1/16 in and becomes 1/8 or 3/16 in depending on how the tile was made. A 12 x 24 is over it on one side, a 12 x 12 is not. in From a data sheet or an agency document
Mortar contact, dry area80% of the back of the tile has to be in contact with mortar in a dry area. It is measured by lifting a set tile back up, not by any number on this page, so the page says the figure rather than judging it. Held as a percentage because that is how it is read and how the box shows it. % From a data sheet or an agency document
Mortar contact, wet area95% mortar contact in a wet area - a shower, a tub surround - and outdoors. The higher figure is why a shower wall project is told a different sentence from a kitchen floor. Held as a percentage because that is how it is read and how the box shows it. % From a data sheet or an agency document

What tiling a floor costs in materials

Four things go on the list: the tile, the grout, the thinset and the baseboard. For the 10 by 12 foot floor this page opens with, in 12 by 24 inch porcelain, that is 9 boxes of tile, a bag of grout, two bags of thinset and four sticks of trim.

Every price on the page is a box, and every one of them starts at a figure of ours that you should overwrite. Tile is the item where that matters most: it runs from under two dollars a square foot to over ten, and no reference price can stand in for the one on the shelf you are standing at. The totals move as you type.

Where the money is

The tile. On this floor it is about three quarters of the list, and the grout and mortar together are under a tenth. That ratio is worth knowing before you start economising: trading down on thinset to save eight dollars under a three hundred dollar floor is the wrong trade, and a bag of the cheapest mortar under large-format tile is how tiles come loose.

What is not here

Labour. A tiler's day rate varies more by city than tile does by quality, and a national average would be a number that is wrong everywhere. If you are pricing a quote, this page tells you what the materials in it should come to, which is the half of a quote you can check.

Nor is the substrate: backer board, uncoupling membrane, waterproofing, levelling compound, or the trim pieces that finish an outside edge. Those depend on what is under the tile and what it is next to, and neither is something a floor area can tell us.

Untick what you have

The list is tickable. If you have the mortar already, or the baseboard is staying on, untick it and the total drops. The link in your address bar keeps the ticks, so the list you carry to the counter is the one you worked out.